China OEM Waterproof Battery Charger 36V 25A Max 42V or 43.8V for Lithium Battery with Free Design Custom

Item Description

Waterproof Battery Charger 36V 25A max 42V or forty three.8V for lithium battery

Quick Descriptions:

Water-proof / water – resist / Marine 36V25A on-board smart battery charger with IP65 rate is made for lithium or lead acid (AGM, sealed) battery powered electric vehicles or boat appliecation, input with PFC worldwide one hundred ten to 230Vac and max charging voltatge is 36V for Li-ion and LiFePO4 batteries. MCU coutrolled and smart 4 actions charging with pre-demand, CC, CV and floating or automatic reduce-off, this charger can apply to out of doors employing and boats, with large efficiency and protect your battery life to the max.


Advanced large frequency switching method energy supply technological innovation.

DC output isolated from AC input.

Car around the world Input one hundred ten / 240Vac(ninety ~ 264Vac) with PFC, 50Hz ~ 60Hz.

Charging parameters are insensitive to the AC input line voltage variants.

Fully automated battery charging: Pre – charging, CC, CV, Absorption, Float or Cut – off.

two LEDs: LED1 Red (electrical power on), LED2 Purple/environmentally friendly (charging/complete)..

Probability to customize charging curve for request.

Protections: Brief circuit, In excess of-voltage, Above-temperature, Reverse Polarity.

Effectiveness > ninety five%.
IP price: IP65 or IP66

Pressured ventilation with supporters.

one hundred% full load burn off-in check.

Aluminum casing, light-weight fat, portable, on-board.


Specialized Specs.:

one) Proportions(LxWxH): 310 × 230 × one zero one MM

two) Web fat: six. KG

3) Max charging voltage(CV): forty two / forty three.8 / 44.1 volt

four) Floating voltage: customized

five) Max output current (CC): 25 amps

6) Charging method: Pre-cost, CC, CV, floating / trickle or shut off

7) AC input voltage: a hundred and ten-230Vac universal

eight) AC enter freq.: 50 / 60 Hz

nine) AC plug: custom made-manufactured

ten) Output connector kind: tailored by apps

11) Enclosure: Aluminum

twelve) Water-resistant rate: IP65


About Us

Found in 2008 as Danl Industrial Co., Constrained in Hong Kong.

We have other two companies:

Danl New Strength Co., Minimal (Hong Kong)

HangZhou Danl Technologies Co., LTD


fifteen years knowledge of designing and manufacturing switching-method engineering battery chargers.

10 years encounter of exporting to Usa, Euro nations around the world and globally.


Specializing in customizing Smart Battery Chargers for battery & EV factories or wholesalers throughout the world and delivering large top quality ODM & OEM support and charging answer.


Primary Products Labeled By Battery Sort:

  • Lithium Battery Chargers For LiFePO4, Li-ion, Li-polymer, LiMOn2 Batteries.
  • Guide-Acid Battery Chargers For SLA, Deep cycle, Silicon and AGM Batteries.

Principal Goods Categorized By EV Type:

E-Tool Battery Charger, E-Bike Battery Charger, E-Skateboard Battery Charger, E-Scooter Battery Charger, E-Bike Battery Charger, E-Lawnmower Battery Charger, E-Golfcart Battery Charger, E-Flooring Sweeper Battery Charger, AGV Battery Charger, E-Forklift Battery Charger, E-Automobile Battery Charger.

Battery Charger Major Output Electricity:

50W, 60W, 80W, 90W, 120W, 180W, 240W, 360W, 600W, 900W, 1000W, 1200W, 1500W, 2000W, 2500W.

Output Voltage & Existing:

four.2V, 6V, 12V, 24V, 36V, 48V, 60V, 72V, 84V, 96V…188V with various charging currents from .5 amps to one hundred amps.

As a smart battery chargers manufacturer, factory and wholesaler, Danl promises that we only source high high quality product, no low cost components, no battling warranty coverage, we guarantee Years Full WarrantyPolicy and Free Replacement. Very pleased of our good quality and best following provider!

Manufacturing unit Photos:


What is a driveshaft and how significantly does it cost to exchange a single?

Your motor vehicle is manufactured up of numerous shifting components. Knowing every single component is essential because a destroyed driveshaft can severely damage other elements of the automobile. You may not know how critical your driveshaft is, but it truly is crucial to know if you want to fix your vehicle. In this post, we will discuss what a driveshaft is, what its signs and symptoms are, and how a lot it charges to change a driveshaft.

Mend ruined driveshafts

A broken driveshaft does not enable you to change the wheels freely. It also exposes your car to greater restore fees owing to broken driveshafts. If the drive shaft breaks although the auto is in motion, it could lead to a crash. Also, it can significantly have an effect on the functionality of the automobile. If you do not repair the dilemma correct absent, you could risk more expensive repairs. If you suspect that the drive shaft is ruined, do the following.
Initial, make certain the drive shaft is secured from dust, dampness, and dust. A correct driveshaft cover will prevent grease from accumulating in the driveshaft, minimizing the possibility of additional harm. The grease will also cushion the steel-to-metallic speak to in the continuous velocity joints. For instance, hitting a comfortable material is better than hitting a metallic wall. A damaged prop shaft can not only cause hard cornering, but it can also trigger the motor vehicle to vibrate, which can even more damage the rest of the drivetrain.
If the driveshaft is destroyed, you can pick to correct it by yourself or get it to a mechanic. Typically, driveshaft repairs expense around $200 to $300. Parts and labor may possibly fluctuate dependent on your vehicle sort and sort of repair. These elements can value up to $600. Nonetheless, if you will not have a mechanical background, it is much better to go away it to a professional.
If you recognize that one of the two travel shafts is worn, it truly is time to repair it. Worn bushings and bearings can result in the generate shaft to vibrate unnecessarily, causing it to break and cause more harm. You can also check out the heart bearing if there is any perform in the bearing. If these symptoms take place, it is greatest to just take your auto to a mechanic as before long as feasible.

Understand about U-joints

Even though most cars have at the very least a single kind of U-joint, there are other varieties offered. CV joints (also known as very hot rod joints) are employed in a selection of apps. The minimal axis is shorter than the main axis on which the U-joint is positioned. In each cases, the U-joints are lubricated at the manufacturing unit. Throughout servicing, the push shaft slip joint should be lubricated.
There are two major designs of U-joints, such as forged and press in shape. They are normally held in area by C-clamps. Some of these U-joints have knurls or grooves. When choosing the right fitting, be sure to measure the whole fitting. To make confident you get the correct size, you can use the size chart or examine the manual for your specific model.
In addition to lubrication, the situation of the U-joint should be checked frequently. Lubricate them regularly to stay away from premature failure. If you hear a clicking audio when shifting gears, the u-joint area may possibly be misaligned. In this scenario, the bearing may need to have to be serviced. If there is inadequate grease in the bearings, the universal joint may possibly need to have to be changed.
U-joint is an crucial part of the auto transmission shaft. With out them, your auto would have no wheeled suspension. Without them, your vehicle will have a rickety entrance stop and a wobbly rear end. Simply because automobiles cannot drive on ultra-flat surfaces, they require versatile driveshafts. The U-joint compensates for this by permitting it to shift up and down with the suspension.
A proper inspection will figure out if your u-joints are loose or worn. It need to be simple to pull them out. Make confident not to pull them all the way out. Also, the bearing caps should not move. Any symptoms of roughness or put on would point out a require for a new UJ. Also, it is essential to note that worn UJs are not able to be fixed.

Indicators of Driveshaft Failure

One particular of the most frequent difficulties associated with a faulty driveshaft is issues turning the wheels. This severely restrictions your overall handle over the motor vehicle. The good news is, there are a number of symptoms that could show that your driveshaft is failing. You must get fast measures to determine the lead to of the issue. 1 of the most typical brings about of driveshaft failure is a weak or defective reverse gear. Other frequent causes of driveshaft damage contain driving way too tough, obtaining stuck in reverse gear and differential lock.
Yet another signal of a unsuccessful driveshaft is abnormal sounds although driving. These noises are generally the consequence of use on the bushings and bearings that assist the drive shaft. They can also cause your automobile to screech or scratch when switching from drive to idle. Based on the pace, the sound could be accompanied by vibration. When this happens, it is time to send your vehicle in for a driveshaft substitution.
A single of the most common signs of driveshaft failure is visible jitter when accelerating. This could be a indication of a unfastened U-joint or worn center bearing. You need to totally inspect your automobile to establish the lead to of these sounds and corresponding signs and symptoms. A qualified mechanic can assist you decide the lead to of the noise. A ruined propshaft can seriously restrict the drivability of the automobile.
Regular inspection of the generate shaft can stop critical damage. Based on the harm, you can replace the driveshaft for everywhere from $500 to $1,000. Depending on the severity of the damage and the stage of restore, the price will depend on the quantity of elements that need to have to be changed. Do not drive with a negative driveshaft as it can lead to a critical crash. There are a number of ways to keep away from this difficulty totally.
The 1st symptom to appear for is a worn U-joint. If the U-joint will come loose or moves way too a lot when striving to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can get your automobile to a mechanic for a complete inspection. A worn u-joint can also show a difficulty with the transmission.

The price of changing the travel shaft

Based on your condition and provider center, a driveshaft fix can price as little as $three hundred or as large as $2,000, dependent on the particulars of your automobile. Labor costs are typically all around $70. Costs for the areas them selves variety from $four hundred to $600. Labor charges also differ by design and vehicle make. In the end, the determination to repair or exchange the driveshaft will count on regardless of whether you require a swift auto fix or a complete car repair.
Some autos have two independent driveshafts. A single goes to the front and the other goes to the back. If your car has four wheel travel, you will have two. If you might be replacing the axles of an all-wheel-drive car, you may need to have a specific element for every single axle. Selecting the improper one can outcome in a lot more costly repairs. Prior to you commence searching, you must know specifically how a lot it will cost.
Relying on the type of motor vehicle you own, a driveshaft alternative will price among PS250 and PS500. Luxurious autos can price as considerably as PS400. Nevertheless, for safety and the all round functionality of the vehicle, changing the driveshaft could be a essential mend. The price of replacing a driveshaft depends on how long your car has been on the highway and how significantly wear and tear it has knowledgeable. There are some signs and symptoms that show a faulty generate shaft and you must just take instant motion.
Repairs can be pricey, so it truly is very best to retain the services of a mechanic with expertise in the subject. You will be paying hundreds of dollars a thirty day period, but you may have peace of thoughts understanding the job will be done appropriate. Bear in mind that you may want to inquire a pal or loved ones member to aid you. Based on the make and model of your auto, replacing the driveshaft is more pricey than replacing the parts and performing it oneself.
If you suspect that your push shaft is destroyed, be confident to resolve it as shortly as feasible. It is not a good idea to drive a auto with abnormal vibration and seem for a lengthy time. Fortunately, there are some swift techniques to repair the issue and avoid high priced repairs later. If you’ve seen the symptoms over, it really is really worth getting the occupation accomplished. There are numerous signs that your driveshaft may possibly want service, including deficiency of power or issues relocating the motor vehicle.

China OEM Waterproof Battery Charger 36V 25A Max 42V or 43.8V for Lithium Battery     with Free Design CustomChina OEM Waterproof Battery Charger 36V 25A Max 42V or 43.8V for Lithium Battery     with Free Design Custom