Product Description
SUNTAE-MOKO Electrical Sightseeing Car
1st, it is electric vehicle, and surprisingly it can be used for sightseeing, golf use, making the most of sunshine!
1. About normal specification:
two. You should send out your usage track record to get complex consultation from our technological department.
Remember to see video clips of test and software at our motor branch
EIFPMG youtube channel
About SUNTAE Electric Car Creation Line:
Main proportions
two.2.1. Duration: 2930 mm 2.2.2. Width: 1520 mm 2.2.3. Peak: 1550 mm 2.2.4. Wheelbase: 2100 mm 2.2.4.1. Wheelbase sidecar: N.A. 2.2.5. Track width 2.2.5.1. Monitor width entrance: 1250 mm 2.2.5.2. Track width rear: 1350 mm 2.2.5.3. Observe width sidecar: N.A. 2.2.ten.6 Ground clearance between the axles: N.A. 2.2.15. Wheelbase to floor clearance ratio: N.A. 2.2.17 Seat peak: N.A.
Masses
two.1.1. Mass in managing order: 433 kg 2.1.2. Actual mass: 844 kg 2.1.3. Technically permissible highest laden mass: 1039 kg 2.1.3.1. Technically permissible highest mass on front axle: 515 kg 2.1.3.2. Technically permissible optimum mass on rear axle: 524 kg 2.1.3.3. Technically permissible greatest mass on sidecar axle: N.A. 2.1.7. Technically permissible greatest towable mass: Braked: N.A. Unbraked: N.A. 2.1.7.1. Technically permissible maximum laden mass of the mix: N.A. 2.1.7.2. Technically permissible optimum mass at the coupling point: N.A.
.1. Make (trade title of the maker): MOKE, E-MOKE
.2. Kind: JC07-A (CV * Type): N.A
.2.1. Variant: 00 (CV * Variant): N.A
.2.2. Version: 00 (CV * Version): N.A.
.2.3. Industrial identify (if available): JC07 (CV * Industrial identify (if obtainable)): N.A
.3. Class, subcategory and sub-subcategory of car: L7e-CP (CV * Class, subcategory and sub-subcategory of automobile): N.A.
.4. Firm name and deal with of company: JHC New Vitality Automobile Hong Kong Co., Minimal Place 1501(203), 15/F, SPA Centre, 53-fifty five Lockhart Highway, Wanchai, Hong Kong
.4.2. Identify and handle of manufacturer’s approved representative (if any): BURBYS 591 Rue Benoit Mulsant 69400 Villefranche Sur Saone
.5.1. Area of the manufacturer’s statutory plate(s): L, x one hundred sixty, y 330, z 730
.5.2. Strategy of attachment of the manufacturer’s statutory plate(s): By riveted
.6. Spot of the car identification quantity: R, x 160, y 330, z 730
1. Vehicle identification variety: ☆R1AFJZZ0XJJ000008☆
Common design characteristics
one.3. Amount of axles: 2 and wheels: four
1.3.1. Axles with twinned wheels: N.A.
one.3.2. Powered axles: F
6.2.4. Innovative braking technique: Abdominal muscles / CBS / Each Abdominal muscles and CBS / None:
conforms in all respects to the sort described in EU type-acceptance e9*168/2013*11202*00 (variety-approval quantity like extension quantity) (CV*: N.A. variety-acceptance amount including extension amount) issued on XX, XX, XXXX (date of concern) (CV*: N.A. day of issue) and can be completely registered in Member States getting appropriate/still left-hand site visitors and utilizing metric/imperial models for the speedometer.
What we will do for you:
one. supply specialized expert just before get and verify your true technological need according to your description on usage in 1-3 working days
two. offer the appropriate and accredited below serious good quality inspection program inside 10 days(if tailored design,we will recheck the shipping and delivery time)
three. give technical assist when the merchandise comes you, to make certain you can operate it easily in true field
4. offer 1 year guarantee, and entire daily life complex support
five. constantly update our merchandise data with you.
Welcome to Check out us for Additional Speaking on Technique Cooperation on any EV associated tasks:
Make sure you follow us at internet site, , and youtube channel and expand automation and EV apps up with each other!
Push shaft type
The driveshaft transfers torque from the motor to the wheels and is responsible for the easy working of the motor vehicle. Its layout experienced to compensate for differences in size and angle. It need to also make sure perfect synchronization amongst its joints. The generate shaft need to be made of high-grade materials to achieve the greatest stability of stiffness and elasticity. There are three major sorts of push shafts. These incorporate: stop yokes, tube yokes and tapered shafts.
tube yoke
Tube yokes are shaft assemblies that use metallic materials as the primary structural ingredient. The yoke includes a uniform, considerably uniform wall thickness, a 1st end and an axially extending next stop. The very first diameter of the drive shaft is greater than the 2nd diameter, and the yoke further consists of a pair of opposing lugs extending from the second stop. These lugs have holes at the finishes for attaching the axle to the car.
By retrofitting the driveshaft tube finish into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 improves the torque transfer ability of the tube yoke. The yoke is normally produced of aluminum alloy or metal materials. It is also utilised to hook up the drive shaft to the yoke. Various patterns are attainable.
The QU40866 tube yoke is employed with an exterior snap ring kind common joint. It has a cup diameter of 1-3/16″ and an all round width of 4½”. U-bolt kits are another alternative. It has threaded legs and locks to support protected the yoke to the drive shaft. Some overall performance autos and off-road vehicles use U-bolts. Yokes should be machined to acknowledge U-bolts, and U-bolt kits are typically the favored accessory.
The end yoke is the mechanical component that connects the travel shaft to the stub shaft. These yokes are usually developed for specific drivetrain factors and can be custom-made to your needs. Pat’s drivetrain provides OEM substitute and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing package is the ideal tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When deciding on a yoke, be sure to measure the outside diameter of the U-joint cap and the within diameter of the yoke ears. Following using the measurements, check with the cross and bearing identification drawings to make certain they match.
While tube yokes are normally simple to substitute, the ideal outcomes arrive from a competent equipment shop. Focused driveshaft experts can assemble and equilibrium concluded driveshafts. If you are not sure of a particular factor, remember to refer to the TM3000 Driveshaft and Cardan Joint Services Handbook for a lot more information. You can also consult an excerpt from the TSB3510 manual for info on angle, vibration and runout.
The sliding fork is one more important part of the generate shaft. It can bend in excess of tough terrain, making it possible for the U-joint to hold spinning in tougher conditions. If the slip yoke fails, you will not be ready to travel and will clang. You need to change it as shortly as achievable to stay away from any hazardous driving situations. So if you discover any dings, be positive to check out the yoke.
If you detect any vibrations, the drivetrain might want adjustment. It’s a easy approach. 1st, rotate the driveshaft till you uncover the right alignment between the tube yoke and the sliding yoke of the rear differential. If there is no obvious vibration, you can hold out for a even though to solve the issue. Maintain in mind that it could be convenient to postpone repairs briefly, but it may possibly lead to even bigger troubles later.
stop yoke
If your driveshaft needs a new finish yoke, CZPT has numerous drivetrain possibilities. Our automotive stop yoke inventory consists of keyed and non-keyed choices. If you want tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-formed threads on its legs. They are typically employed to join two heads back to back. These are practical alternatives to support maintain drivetrain factors in location when driving above tough terrain, and are normally appropriate with a selection of designs. U-bolts need a specifically machined yoke to acknowledge them, so be positive to get the correct dimensions.
The sliding fork will help transfer energy from the transfer situation to the driveshaft. They slide in and out of the transfer scenario, making it possible for the u-joint to rotate. Sliding yokes or “slips” can be acquired independently. Whether you want a new 1 or just a number of elements to improve your driveshaft, 4 CZPT Parts will have the parts you require to restore your automobile.
The conclude yoke is a needed part of the drive shaft. It connects the travel teach and the mating flange. They are also utilised in auxiliary electricity gear. CZPT’s drivetrains are stocked with a range of flanged yokes for OEM purposes and customized builds. You can also uncover flanged yokes for consistent velocity joints in our substantial inventory. If you never want to modify your current drivetrain, we can even make a personalized yoke for you.
